Stainless Steel Mechanical Spur Gears

Industrial stainless steel spur gears are a type of Gear that is characterized by a toothed portion parallel to the center axis and a toothed concave portion that is not upright (slightly curved). This design can reduce the speed and torque gap when the gears mesh with each other, and increase the power utilization. Spur gearboxes are also called eccentric shaft gearboxes. They are generally 37MM in diameter and supported by oil-containing bearings. They have a long life and are particularly quiet. There are many applications in the speed change of industrial machinery, and the speed change effect is achieved by the meshing of large and small gears. The low-speed shaft in the spur gearbox is equipped with a large gear, and the high-speed shaft is equipped with a small gear. The process of acceleration or deceleration is completed through the meshing and transmission of the gears. Spur gears are used in power plants to convert energy generated by wind or water into electrical energy, and are widely used in industries such as aircraft engines, trains, bicycles, ball mills and crushers that do not make much noise. Because of their simple manufacturing, these gears can be manufactured with high precision, so they can be used at almost any speed, but are usually used in low-speed applications.